This is just a sample of the many antiques we have sold. Click link to see other Sales Archive Pages on this Site.
We can help you sell quality Antiques Contact Us.
For further info on consigning / selling your antiques
with us please see our FAQ page,
the
Appraisal / Selling Page and the Selling
Your Collection Pages.
Our current offering of Antiques for sale are at our sister Website Patented-Antiques.com.
Stanley
#10 1/2 Rabbit Plane This is one of Stanley's
most popular models of rabbeting bench planes, and this example still retains 90%
or more of its original black japanning. The Sweet Heart era cutter is short
with only about 3/8" of life left in it. The throat is perfect, and the sides
have been refinished. There is no major damage, casting chips, cracks, welds,
repairs or the like. It just must have looked bad to the last owner that he
lapped the sides and bottom of this 9" plane. The rosewood handle has a near
invisible glue joint 1/2" up from the base. It is lower than normally seen,
and if I did not tell you you would hardly know. This Sweet-Heart Era
#10 1/2 plane will make a great user so stop using that nice one and put this one
back to work.
Good . . . . . $175.00 SOLD
Stanley
1st Model #10 1/2 Rabbit Plane
These early versions of Stanley's popular
rabbit plane were only made for a short 10 year period ending in 1895 or so.
This example is in very nice condition and has no problems with the casting near
the cutouts as is often the case. The front moveable portion is nice and operates
as it should. There is a very small chip in the edge of the throat, and another
minute area in the throat that is dimpled in but not cracked. It is approx
1/8 x 1/4 wide, and this flaw would not interfere with the proper operation and
is barely discernable to the eye, but it is there. The handle and knob
are very nice and proper. Rare!!
Good . . . . . $295.00 SOLD
Stanley #10 1/4 Tilting Handle Rabbet Plane Stanley only made these planes for a short 5 year span near the turn of the last century. This is a nice example and it still retains 90% or more of its original black japanned finish. The properly marked cutter has over a half inch of usable life left in it. The exposed metal surfaces have a nice even original patina and the nickers are present. The one apology is that the rear handle is a good replacement. It appears that it has been fashioned out of a standard handle, with only the leading edge not having any finish on it after having been cut, being the telling feature or giveaway. It looks good, and this is a hard one to find!
Good . . . . . $495.00 SOLD
Stanley
# 90 J USA Bull Nose Rabbit Plane The #90 J rabbit is 1" wide and 4" long. This
example is in nice condition. There is no damage or problems. It is
a USA model. Nice!
Good +........ $400.00 SOLD
Stanley
#90 Bullnose Rabbit Plane in Box This
# 90 Rabbit plane is in like new condition. It is one of the last
American made versions. Nice. You will
like it.
Good . . . . . $125. 00 SOLD
Stanley
#90 Rabbit Plane in Box This one is earlier
that the above one, and is from the 30"s or so. It has seen little if any
use and is minty nice condition. The Box has been taped. You will
like it.
Good . . . . . $150.00 SOLD
Stanley
# 92 Cabinet Makers 3/4" Wide Rabbet / Bullnose Plane
There is nearly an 1" of cutter left,
it is marked USA and other than some minor nickel loss this #92 is in very
nice condition overall and damage free. This is the narrow version of Stanley's
90 series of rabbet planes and is just under 5 1/2" long overall and has an 3/4"
wide cutter. Care must be taken when buying these planes as there are a myriad
of small things that can go wrong, be broken, or damaged, and these defects are
often missed by the uninitiated or inexperienced buyer. This one has none
of those telltale problems with chips, casting breaks, or stripped adjusters.
The previous owner did stamp a ID # up on the nose but this hardly detracts from
an otherwise near mint plane. It is Nice!
Good . . . . . $175.00 SOLD
Stanley # 92 Bullnose Rabbet Plane
The #92 Bullnose Rabbit is a very popular plane Stanley first
introduced in 1902. The 3/4" wide cutter shown is near full length. The
nickel is 90% or better. No other problems. Another nice plane in nice
condition.
Fine . . . . . $120.00 SOLD!!
Stanley
# 93 1" Cabinet Makers Rabbet / Bullnose Plane
This one is as nice as one could ask for. No
damage to the weak areas, and the cutter looks to be full length.
Good . . . . . $245.00 SOLD
Stanley
# 289 Skew Rabbit & Fillister Plane The plane is all original, and has the proper centered fence that is oftentimes
missing. It is a Sweet Heart era. A versatile, heavy duty plane with
a skew cutter that works well
in a variety of applications. Nice!!
Good . . . . . . . $225.00 SOLD!
Stanley
# 98 Side Rabbet Plane / Original Box Like
new. A later Sweetheart era version with depth stop. Very nice!!
Fine . . . . . . $125.00
SOLD!
Stanley
# 98 & 99 Sweetheart Era Side Rabbet Planes Both
are very nice with depth stop and nice cutters. A good pair of users.
Fine . . . . . . $175.00 / PAIR SOLD!
Stanley # 90
Bullnose Rabbet Plane
This is a very nice example. The cutter still has plenty of life left. It is a US made model.
The #90 is 1" wide and a very useful style
plane specially the bull nose feature when you remove the top half and use it as
a chisel plane in corners and tight areas. These planes are prone to
damage, and need to be looked over prior to buying. The blade adjuster
can be stripped, and if the cutter is over tightened the cap, or "bridge can
be cracked. That is not the case in any of the ones I have offered
here. Nice!!
Fine . . . . . . $95.00 SOLD!
Stanley #75 Rabbet Plane
in Original Box
This 375 Rabbit
plane is complete and like new.
Fine . . . . . . $45.00
SOLD!
Stanley
# 10 1/2 Rabbit Plane
This #10 1/2 rabbet plane is in very nice condition. The cutter has a lot of life left in it. The sides
and bottom are rust and pit free and have been lapped. The japanning is original and 90% or so.
The handle is Rosewood, nice, and proper. A very nice example.
DP-S10HF
Good + . . . . . . $195.00 SOLD!
Stanley Type 1 # 78 Rabbet Plane This one is
one of the earliest 378 duplex rabbits. Shows use, but is sound and pretty
nice. Many users prefer these over the newer versions. .
Fine . . . . . . $45.00
SOLD!
Stanley # 39 1 Inch Dado Plane
This one is nice. It is complete. It has been cleaned, and
there is staining and patina. It is not pitted.
Good +. . . . . . . $150.00
SOLD!
Stanley
# 140 Rabbit Block Plane w/ Skew Cutter The cutter
still has plenty of life left and is near full length. The japanning is
original and at least 90%. Given that the cap is Japanned I assume
this was one of the last examples before they stopped production during WWII..
The side plate is nice, and the screws are original and proper. These are
considered one of the best designed Stanley planes and are a favorite with
users.
DP-S140
Fine . . . . . . $125.00
Stanley
# 180 - 181 - 182 Rabbet Planes Stanley
first introduced this line of rabbit planes in 1886. They came in three
different sizes. 1", 1 1/4, and 1 1/2" wide. They did not have any
spurs and that is the main difference from the #190 series that look similar.
Good + . . . . . . $25.00 / Choice SOLD!
Stanley # 92 Bullnose Rabbet Plane
The #92 Bullnose Rabbit is a very popular plane Stanley first
introduced this model in 1902 and there is still a version being made in
England . This is a USA model. The 3/4" wide cutter shown is near full length. The
nickel is 95% or better. No other problems. A nice plane in nice
condition. PK-S92-1
Fine . . . . . $150.00 SOLD!
Stanley
# 10 1/2 Rabbit Plane
This WWII era Stanley #10 1/2 rabbet plane is in very nice condition. The cutter has a lot of life left in it. The sides
and bottom are rust and pit free and this plane does not have any casting
problems, cracks or chips. It has been cleaned and looks good. The japanning is original and 90% or so.
The handle is painted hardwood, nice, and proper. The blade
adjusting wheel is steel. A nice example of a short lived var8iation of
one Stanley's most versatile planes. GM-S10HFW
Good + . . . . . . $145.00 SOLD!!
Stanley
# 79 Double Side Rabbet Plane Good + . . . . . . $75.00
SOLD!
Stanley # 94 Cabinet Makers Rabbet Plane The button up front has the Sweetheart logo thus dating this example from the 20s thru the 30s. There is nearly an 1" of cutter left, and other than some nickel loss it is in very nice condition overall and basically damage free. This is the largest version of Stanley's 90 series of rabbet planes and is 7" long overall and has an 1 1/4 wide cutter. Care must be taken when buying these planes as there are a myriad of small things that can go wrong, be broken or damaged, and these defects are often missed by the uninitiated or inexperienced buyer. This one has none of those telltale problems with chips casting breaks or stripped adjusters. It is Nice!
Good . . . . . $325.00 SOLD
Stanley #79 War Issue Side Rabbit Plane This is the nicest examples of Stanley's popular and versatile all in one side rabbit plane I have ever had. The original japanning is flawless and it is the hardest and shortest produced of all the models as it was only done in this finish during the war to save on precious metals for the war effort. Collector Condition!
Good . . . . . $125.00 SOLD
This is just a sample of the many antiques we have sold. Click link to see other Sales Archive Pages on this Site.
We can help you sell quality Antiques Contact Us.
For further info on consigning / selling your antiques
with us please see our FAQ page,
the
Appraisal / Selling Page and the
Selling
Your Collection Pages.
Our current offering of Antiques for sale are at our sister Website Patented-Antiques.com.
This website is Copyrighted
(1998 -
2009)
Larry & Carole Meeker