Antique & Vintage
Saws & Related Tools

This is just a sample of the many antique tools & saws we have sold.
Click link to see other Sales Archive Pages on this Site.

We Buy Quality Antique Tools
Contact Us at AntiqBuyer@gmail.com

Special Note Concerning Prices Seen Below:
Most prices seen reflect actual sale results from this website.
Prices seen span a long time and may not reflect current values. Some are selling for more, many now sell for less.
On other pieces you will see no price, or a price range, with or without an explanation. The reasons for that are discussed on the FAQ page.

Our current offering of Antiques for sale are at our sister Website Patented-Antiques.com.

Disston ACME 120 26 Inch 11 TPI Crosscut Saw    A nice looking carved handle. The saw blade is nice, straight, and the etch readable.

Fine . . . . . $75.00        SOLD!!

Henry Disston & Sons #18 Saw  Clear / strong etch.. 28" 5 1/2 pt. Straight. Looks to have never been used.Plastic "Disstonite" handle is marked Pat Appl'd For. Pre WWII this saw dates from the mid 20's. A rare variation. Nice. 

Fine +. . . . . SOLD!!

Henry Disston & Sons # D 95 Victory Saw  Clear / strong etch.. 26" 8 pt. Straight. Nice Rosewood handle. Minor Stains but no rust or pitting. This one looks to have never been used either. Nice. 

Fine +. . . . . SOLD!!

Henry Disston  # D 115 Victory Saw w/ Rosewood Handle  Clear etch. Spotting, but not pitted or rusty. Freshly sharpened  - - - - 20 years ago. Still has wax on it.   26" 8 pt. Straight. Nice Rosewood handle.  A nice saw.

Good + . . . . . $125.00      SOLD!!

Henry Disston & Sons # D 23 Saw  Clear etch..26" 8 pt. Straight. Nice handle. Minor Stains but no rust or pitting. This saw has seen little use and feels sharp   Nice.

Fine . . . . .$75.00          SOLD!

Disston # D-76 Centennial Saw  Disston came out with this saw in 1976 to commemorate the Bicentennial. They made just 1000 of them, and this one is numbered 0835. Clear / strong etch.. It was never used. The certificate describing the saw and event is glued to the back of the original display board that was part of the deal. A very hard to find saw that will be the highlight of a saw collection. Nice.

Fine . . . . . $325.00      SOLD!!

Disston D-76 Commemorative 1876 - 1976 Bi-Centennial Saw  This unusual Disston saw was issued in 1976 as a special by the town of Danville VA for the bicentennial in 1976. Danville VA was  the town that Disston had moved to after it was sold in the 1950's. It is # 806 of 1000 made for that event and is in like new condition.

The collector ordered it, opened up the box to take a look and then put it back on the shelf to never be seen again till now. It has the original display board,  the original paper wrap, and original shipping box.  It has a  strong etch describing the event with other info, and there is also a piece of brittle paper describing the event. The handle is a nice design and this saw will be a welcome addition to the saw or tool collection.  Very few of these turn up and even fewer in this nice condition. A must have for the complete Disston collection.   Nice

Fine . . . . .$250.00           SOLD!!

Disston #43 Hand Saw   Marketed as the complete combination tool, Disston implied that you could leave the rest home and just show up at the job the job with this. Included was a scribe, level, square, ruler, straight edge, and of course the saw. It looks good, and the blade is straight. Both vials are good, and the patent dates an other info are readable but faint on the blade.

Good  +. . . . . . $550.00       SOLD

Disston D-17  Double Duty DDD The cutting edge is 26" long. It is straight. There are minor areas of pitting and some stains. The etching is pretty good.

Good +. . . . . . $95.00       SOLD

Saws by Other Makers

The


J. Flint Rochester NY Two Man / Two Handle Saw   Here is an odd ball 19th century saw. J. Flint is  well known saw maker who first set up in Rochester NY and later moved his business into Canada. He is most famous for his near unique patented hand saw handle design that has two handles on the same end to allow the user to better use both hands when rip cutting lumber.

There are plenty of references to him and his business to be found online, especially concerning that patented 2 handle saw handle. He is also well known for his line of well made backsaws and articles about them have appeared in the Gristmill. Despite that I could find no info about, or references to, a saw like this. I could also not find a copy of any catalogs although I did see reference to ones. Disston put out a similar saw which is pictured in their 1876 catalog. (see last pic)

The overall condition is very nice. The horns on the distinctive handles are good, and the teeth are all good. The blade is not pitted or rusty. The stamp is clear, and placed right in the middle of the saw blade.   Different!!

 Good +. . . . . . . $375.00     SOLD!!

Atkins #72 Ship Point Saw  Clear / strong etch.. 26" 9 pt. Straight. Nice Fruitwood handle. Minor Stains but no rust or pitting. This one looks to have never been used either. Nice. 

Fine +. . . . .SOLD!!

Geo. Bishop & Co. # 8 26 Inch 7 pt. Saw   A nice looking saw. Readable etch. The handle is nice noting small horn chip. Straight. Will clean to be nicer.

Good +  . . . . . $40.00          SOLD!!

Simmons Hardware / S. H. Co. 26" 6 Pt. Saw 999 Fast Mail Handsaw w/ Train Etch An unusual saw by Simmons Hardware of St Louis who are most famous for their line of Keen Kutter tools and hardware. Visible etch of train locomotive with additional info including Cast Steel Warranted & Patent Temper / Patent Ground. It is a 6pt. It is sharp and straight with an ever so slight wave / bump for about 2" long along the length. The handle is OK. An interesting saw.

Good  . . . . . . 50.00           SOLD!!

Atkins 26" 8 pt. Crosscut Saw   A nice looking saw. The blade etch is viewable but very weak. I think it says 60, but might be 64, or?  Super carved handle.  Straight.

Good + . . . . . $30.00     SOLD!!

Atkins Improved Universal # 93 26" 8 pt Crosscut Saw   A nice looking saw with an odd tooth pattern. Super carved handle. Straight. Similar to a Disston Double Duty, in a way, or not, or so I have read. The blade etch is viewable. I read about their cutting characteristics, not great, and this lives up to them, or it needs to be sharpened properly. A nice collectible saw!!

Good + . . . . . $40.00     SOLD!!

Simonds 26 Inch 7 pt. Saw   A nice looking clean saw. Readable etch except for the actual model #. The handle is nice noting an ever so slight wave near the end. Straight.

Good +  . . . . . $35.00     SOLD!!

Richardson's "New Timber Saw"  Clear / strong double etch.. 28" 8 pt. Straight with wave.The top of the handle has minor chip. A rare saw with the heat reducing factory cutout. 

Good +. . . . .SOLD!!

#24 Wheeler, Madden & Clemson Crosscut Saw w/ June 3 1879 Holden Patent Handle   Weak etch. 28"  Straight. Nice handle.  A nice saw.

Good + . . . . . $65.00     SOLD!!

Geo. H. Bishop & Co # C23S 26" 5 1/2 Pt Rip Saw  Nice handle. Clear / strong etch.. 5 1/2 pt. Straight with a slight wave.This is about as nice as one could ask for. 

Fine +. . . . SOLD!!

Winchester #10 26"  5 1/2 pt Crosscut Saw  Nice handle. Clear etch.. 5 1/2 pt. Straight.  This is about as nice as I have ever seen or had.A good looking hard to find saw.  Good as the gun, or so the logo / saying goes. 

Fine. . . . .SOLD!!

Diamond Edge Shapleigh Rip Saw  Nice Strong etch. 5pt. Straight, sharp and ready to go  Saws in this condition are getting hard to come by. You could not ask for much nicer condition.  Nice

Good + . . . . .$95.00         SOLD!!

Harvey W. Peace Vulcan Saw Works Brooklyn NY 26" #35 8pt Crosscut Saw  Nice handle with one small chip in horn. Etch there but weak. 8pt. Straight.  This will be a good user with a bit of reconditioning. 

Good . . . . .$60.00         SOLD!!

Atkins #65 Silver Steel Crosscut Saw    This handsaw is straight has a good etch and will look great after being cleaned up a bit.  Nice

Good + . . . . .$50.00          SOLD!!

STAR Crosscut Saw  This handsaw has a bit of a bend in it, but not bad. The Star etch is clear and bold. The handle is pretty nice. It is a rare handsaw.  Nice

Good  . . . . . $50.00            SOLD!!

Early Framed Veneer Saw  This unusual saw is nearly 5' across. It was marked that it was for cutting veneer, but I have never seen one before so I am not sure. Nice and different.

Good+ . . . . . . .$150.00           SOLD!

Lakeside Saw & Tool Co. 24" 8pt Crosscut Saw      A little known maker of a nice saw. A good strong etch. It is straight. Nice

Good + . . . . . $65.00         SOLD!

Groves & Sons Sheffield 9 pt 26" Crosscut Saw    This handsaw is straight has a strong stamp / etch. In addition to the Grove name and Sheffield location, it also says it is double refined spring steel.   Very Nice!!

Good +  . . . . .$125.00           SOLD!!

Geo. H. Bishop & Co # 7 18" 8 Pt. Panel Saw  Nice handle. Clear etch.. 8 pt. Straight.This is nice. 

Good + . . . . .$75.00        SOLD!

3 different 2 Man Cross Cut Saws  The largest one is an 8' saw. It is NOS. The others are just under 6'. I cleaned the light rust that was on these saws. I used a nylon brush on a power sander. All three saws came from a closed hardware store and had minor storage rust issues. I think you can see in the pics that they have not been sharpened or used at all. You can just make out etches on 2 of them. The 8' one says Precision Ground.  Also included is the pair of Disston handles which are also new / NOS.

Good + . . . . .$350.00       SOLD!

Antique Disston
Back / Tenon / Miter
Saws

The


Disston 28" Miter Box Back Saw A big saw. Straight. 12 TPI. Faint etch. 5 1/2" tip of tooth to bottom of back. Marked Disston on top bar.

Good + . . . . . . $55.00            SOLD!!

Disston 26" Miter Box Back Saw  Straight. I count 10 TPI. Weak etch. Approx. 4 1/2" tip of tooth to bottom of back.

Good + . . . . . . $45.00        SOLD!!

Disston No. 8 Half Back Saw 16" 12 TPI Straight with a few minor dents, small dings at the tip. Weak partial etch. You can make out the word Keystone and see the Keystone logo in certain light. Tough to make out the rest. Nice handle. An early and rare back saw.

Good + . . . . . . 400.00        SOLD!!

Disston 14" No. 4 Back Saw  Good etch. Near new condition. Sharp. It was wrapped in 1980 newspaper after it had came back from being sharpened and has not been used since. Nice!!

Fine . . . . . . $65.00          SOLD!!

Disston 14" Cast Steel Back Saw 12 TPI Straight. Nice handle. A nice back saw.

Good + . . . . . . $75.00    SOLD! 

Henry Disston & Sons 16" Cast Steel Backsaw / Dovetail / Tenon Saw 12 TPI. It is straight. Teeth look good. Handle is good.  A nice big saw.

Good + . . . . . . $35.00        SOLD!!

Henry Disston & Sons 12" Cast Steel Backsaw / Dovetail / Tenon Saw 12 TPI. It is straight. Nice handle. Looks to need a sharpening.

Good  . . . . . . $30.00         SOLD!!

Disston Cast Steel Back Saw 12" 12 TPI Straight. Nice handle. A very nice back / dovetail / tennon saw.

Good + . . . . . . $60.00         SOLD!!

Henry Disston & Sons #8 12" Half-Back Saw The overall condition is very nice. The etch is still visible, and it is straight.No pitting or rust to speak of. The handle is damage free and very nice.

Any Disston Half-Back saw is pretty rare and a very hard to find saw. This one having a 12" blade makes it doubly so.  All of the info I found online about Disston Half Back saws says it does not exist in this 12" size and that 14" was the smallest offered. There was an article in a MWTCA Gristmill a while back by saw collector / researcher Phil Baker that indicated he had one this size and that it is overall smaller in scale than the 14" or others. Not having one of those, I am not sure about that. Who wants something few others have?  Opportunity knocks!!!

Fine. . . . . $650.00     SOLD!!

Disston Cast Steel Back Saw 10" 14 TPI Straight. Nice handle. Needs to be sharpened. Otherwise a nice back saw / dovetail / tenon saw.

Good . . . . . . $40.00          SOLD!!

Disston Cast Steel Back Saw 12" 16 TPI Straight. Nice handle. Good etch. A nice little back saw.

Good + . . . . . . $75.00         SOLD!!

Disston 16" Cast Steel Back Saw / Dovetail Saw 12 TPI Straight. Nice handle. A good user.

Good + . . . . . . $65.00            SOLD!!

Henry Disston & Sons Back Saw The overall condition is very nice. Light barely readable etch. Little or no rust to speak of. The fruitwood handle is very nice. looks like 11 TPI. The 16" blade is straight.

Fine . . . . . $80.00      SOLD!!

Disston Brass Back 12" Back Saw   Straight. Some pitting on the backside that looks like lines as seen in the last pic.

Good +. . . . . $85.00      SOLD!!

Henry Disston 12" Back / Tenon Saw This early split screw saw is nice.

Good +  . . . . . . $125.00     SOLD!!

Henry Disston & Sons 12" Brass Back Dovetail Saw   A nice looking saw that will perform well w/ a tune-up and sharpening. 14 TPI

Good . . . . .$75.00      SOLD!!

Disston #9 Back Saw  This is marked Cast Steel.   Beautiful handle. Slight wave. Otherwise Nice!!

Good +. . . . .$175.00        SOLD!!

Henry Disston & Son 16"  No. 77  "Mechanics Own" No Set Back Saw The condition of this rare #77 No Set Disston & Son Back Saw is as nice as you will ever find or see. Let's call it FINE to get that out of the way. The etch is clear and bold. There is some staining as seen. There is no rust or pitting to speak of. It is straight.  The handle is damage free and very nice. Note that it is a Disston & Son, which would mean it was one of the earliest versions of this saw.

I read these saws were filed differently from normal backsaws, and this one sure fits that description.   I spoke to several saw-savy people and heard several different opinions. I have provided a number of photos so you can decide for yourself.  Bottom line is that this is such a rare saw I do not think most would know what is or isn't "right" or original. I do not. That is why I have provided all the pics. As with the rare # 8 half back I have listed above, the real question here is, who wants something few others have?  Opportunity knocks!!!

Fine. . . . . $600.00    SOLD!!

Early Disston Dome Nut 12" Backsaw  This unusual early Disston backsaw is pretty nice. The blade is straight and has a lot of depth left. There is some minor pitting that can be worked around if it is to be put back into use. The teeth look ok and there are no broken ones, but it will need to be sharpened.

The brass back in addition to the Disston & Eagle logo is stamped spring steel / extra temper as well as the Phila. Pa location below the Federal Eagle. The fruitwood handle is solid with just minor slivers / chips off the horns. The threaded stud for the large dome nut where one would expect to see a stamped medallion is broken off and the dome nut on the back side is missing.

A note about  the style of high dome nuts this saw has. Cresson, an early Philadelphia PA saw maker used this style nut before Disston bought them out around 1860. According to the Disstonian Institute, a website about Disston Saws and their history,  Disston used this style nut on their handsaws in the 1860's - 1870's. I found no reference or illustrations there about their use on back saws.   Given that the brass back is marked simply Disston and that this logo predates the use of the Disston and Son logo introduced in about 1865,  I believe we can safely date this saw as being from the Civil War era of 1860 - 1865. An early and rare example of a finely made backsaw!!

Good . . . . .$350.00           SOLD!!

Disston Cone / Dome / Tall Nut Back Saw   Although the brass back is marked Orton Jewett & Busby, I do not think they were the maker, just the seller or distributer. I believe this to be an early Disston tall cone nut back saw. There is some minor pitting, but it is straight, and will make a fine user after a tune-up..  

Good +  . . . . .$250.00         SOLD!!

Early Brass Backed Split Screw Henry Disston 12" Back Saw   The blade is straight.  It has split nuts indicating it is early. The handle is apple or other fruitwood and fine. A super condition early back saw for use or the collection.

Fine . . . . .$250.00     SOLD!!

Henry Disston & Sons 14" Cast Steel Backsaw / Dovetail / Tenon Saw I count 13 TPI. It is straight. Nice handle. Teeth look good. Top bar is marked.  A very nice saw.

Good + . . . . . . $95.00         SOLD!!

Disston No. 4 Cast Steel Back Saw 10" 12 TPI Straight. Nice handle. Good etch. A very nice little back saw.

Good + . . . . . . $40.00       SOLD!!

Stanley 150th Anniversary Dovetail Back Saw  One of the series of Commemorative Hand Tools Stanley put out in 1993. Box & COA. Nice!! Looks like it may have tested out one time.

Fine . . . . . $95.00       SOLD!!

Misc. Maker
Back / Tenon / Miter
Saws

The


William McNiece 12" Back Saw w/ Split Nuts The overall condition is very nice. c. 1860's or earlier. Staining, minor spots of pitting near top of plate. Little or no rust to speak of. The handle is damage free and very nice. The 12" blade is straight.

Fine. . . . . $50.00           SOLD!!

Shurly and Dietrich 12" Back Saw This 12 inch back saw is by the well known Canadian saw maker Shurly and Dietrich. The button has a Maple Leaf and calls out Galt Ontario Can. and a patent date of December 27th 1883.

I count 12 TPI. Split nuts. There is a slight wave or ripple along the length of the blade. There are pitted areas on the backside as shown. The handle looks good with some tight cracks that seem solid. Lots of potential here for restoration that will produce a fine user saw.

Good . . . . . . $30.00       SOLD!!

Robt Sorby Brass Back Cast Steel 14" Backsaw / Dovetail / Tenon Saw The teeth count is 11 TPI. It is straight. Nice handle. Teeth look good. Top bar is marked. Split nuts. A very nice saw.

Good + . . . . . . $65.00        SOLD!!

E.T Roberts & Lee 12" Brass Backed No. 580 Backsaw / Dovetail / Tenon Saw 14 TPI. It is straight. Nice handle. Teeth look good. Good etch. A nice saw.

Good + . . . . . . $75.00        SOLD!!

Cincinnati Saw Company 12" No.4 Back Saw I count 14 TPI. Etch is weak and barely visible. Button says Bishop the well known saw maker based in Ohio. Blade has a bit of a wave.

Good . . . . . . $40.00           SOLD!!

Atkins "Silver Steel" Back Saw 12" 16 TPI Straight. Nice handle. Good etch. A nice little back saw.

Good + . . . . . . $55.00        SOLD!!

Sorby 10" Cast Steel Back / Tenon Saw The name is stamped on the top bar. There is a small sliver chip of wood missing on one side. Handle with split screws is pretty nice. It has 14 TPI by my count. The blade is straight.

Good + . . . . . $45.00           SOLD!!

Cincinnati Saw Company 12" No.4 Back Saw Straight. Nice. I count 14 TPI. Etch is visible. By Geo. H. Bishop the well known saw maker based in Ohio.

Good . . . . . . $35.00          SOLD!!

Geo Bishop 8 Inch Dove Tail / Back Saw   A nice looking clean little saw. The handle is nice. Straight.

Good +  . . . . . $55.00       SOLD!!

Woodrough & McParlin 12" Dovetail / Back Saw  This is a nice saw by the Ohio maker famous for the Panther saw.  Nice!!

Good  . . . . . $75.00     SOLD!!

C. E. Jennings & Co. New York 16" Cast Steel Backsaw The overall condition is nice.  Staining, minor spots of pitting. The fruitwood handle is damage free and very nice. The 16" 12 TPI blade is straight. Assume it will need to be sharpened.   

Good + . . . . $75.00        SOLD!!

Richardson 6" Open Handle Backsaw / Tenon Saw    A pretty rare little saw in great condition. In addition to the Richardson Newark NJ Extra Warranted Spring Steel info stamp on the bar, the blade etch says "Made Expressly for Chandler & Barber - Dealers in  Hardware & Mechanics Tools, 124 Summer St. Boston."  It is straight. Very Nice!!

Fine . . . . . $95.00       SOLD!!

18" Atkins Sheffield Saw Works # 3 Dovetail / Back Saw  A nice saw. Straight. It will be a good user.

Good + . . . . . $45.00      SOLD!!

Bishop 12" Duplex Combination Dovetail / Back Saw  This is a nice saw.

Good . . . . . $40.00     SOLD!!

Clegg Shepherds Bush 8" Open Handle Backsaw This small back saw is marked Clegg - Shepherds Bush. It is an 8" Open Handle Backsaw that is mid 19th century and English.

The handle is nice. It is pretty straight, and will benefit from a sharpening before being put back into service.

Good . . . . . $30.00      SOLD!!

Spear & Jackson 12" Back Saw   The blade is straight. It has been sharpened. It has split nuts indicating it is early. The handle is pretty nice noting the tip of the top horn is chipped.   A nice saw that will make for a great user.

Good. . . . .$55.00            SOLD!

18" Back Saw w/ Split Nuts  The overall condition is nice.  The 18" blade is straight end to end.  It tapers from end to end and is about 4 1/2 at the heel and 3 3/4 at the toe. I see no etch and you can only make out a few letters of the name on the top bar.(see pic) Looking down the tooth line they are not all at the same height. It will need to be re-sharpened. Note the distinctive handle shape with the bottom squared off. I believe it is factory. I do not recognize the maker.  Different!!  

Good +. . . . . $125.00    SOLD!!

Fenton & Marsden 14" Brass Back BackSaw  A well made back, Tenon or dovetail saw. It is straight. No pitting that will ever be an issue. Split screws.Some minor damage / chip to the handle horn. Nice.

Good + . . . . . .$95.00      SOLD!!

Spear & Jackson #52 8" Brass Back Dovetail Saw   The owner took care of his tools and kept this nice little saw in its protective sheath when not being used. The blade is straight, sharp and ready to go back to work.

Good +. . . . .$50.00        SOLD!!

Tyzack & Turner 10" Brass Back Open Handle Back Saw   A nice early little saw w/ split nuts that will perform well w/ a tune-up.

Good . . . .$65.00          SOLD!!

Harvey W. Peace 14" Brass Backed #50 Tenon / Back Saw  This is marked Spring Steel & the #50 which I assume is the model #.  Split screws.   Beautiful handle. Slight wave. Otherwise Nice!!

Good +. . . . .$125.00         SOLD!!

Moseley & Son  Brass Backed Spring Steel Backsaw  An early brass backed English backsaw by a well known and documented  maker. It is 8' long with a slight wave. The open handle is Rosewood and has some handle chips. It will need to be straightened and sharpened to be a user.

Good . . . . . $60.00           SOLD! 

Groves & Sons 12" Back Saw    The medallion says established in 1770. Doubt it is that early, but it has split nuts and is pretty nice. A nice saw that will perform well w/ after being tune-upped and sharpened.

Good +. . . . .$95.00       SOLD!!

Wheeler Madden & Clemson "The Standard 14"  Spring Steel Back Saw   A nice saw by the well known early New York maker Wheeler Madden  & Clemson that will perform well w/ a tune-up.  14 TPI.

Good . . . . .$85.00      SOLD!!

R. Grove & Sons Made For G. Musgrove Lincoln Brass Backed Back / Tenon Saw This early open handle back saw is nice noting some minor pitting here and there. The blade is 9" long and pretty straight. It has a great stamp. Different & Nice!

Good +  . . . . . . $50.00     SOLD!!

Sorby Open Handle 10" Brass Back Backsaw  This is in nice condition.It is straight and feels sharp. Nice handle.

Fine. . . . . $125.00               SOLD!

Jackson Cast Steel 14 Inch Backsaw  Straight & Nice!!

Fine . . . . . $55.00           SOLD!!

14" Robert Sorby Brass Back Dovetail / Back Saw    Missing one split nut from backside. Otherwise nice  It will be a good user.

Good  . . . . . $60.00       SOLD!!

10" Open Handle Robert Sorby Brass Back Dovetail / Back SawNice. It will be a good user.

Good  . . . . . $60.00          SOLD!!

10" Backsaw Dovetail / Tenon Saw 14 TPI It is a 10" 14 TPI. It is straight. There is remnants of a etch on the blade. The handle is pretty nice.

Good + . . . . . $28.00    This Sold on eBay for $40.00       SOLD!!

10" Backsaw Dovetail / Tenon Saw 14 TPI It is a 10" 14 TPI. It is straight. There is remnants of a etch on the top bar. I think it says Sheffield. The handle is pretty nice noting a chip on the top horn.

Good + . . . . . $35.00      SOLD!!

Sears 14" Spring Steel Backsaw / Dovetail / Tenon Saw 12 TPI. It is straight. Nice handle. Teeth look ok, but wants to be sharpened. Good etch. A nice saw.

Good + . . . . . . $30.00         SOLD!!

R. H. Davis by Disston 12" Cast Steel Backsaw / Dovetail / Tenon Saw Pretty nice. 12 TPI. It is straight. Teeth look good. Open handle has a solid repair.

Good . . . . . . $28.00         SOLD!!

Geo. H. Bishop & Co. 16" No.8 Spring Steel 12 Pt. Back / Dovetail / Tenon Saw Straight. Nice. I count 12 TPI. Etch is visible & strong. By Geo. H. Bishop the well known saw maker based in Ohio.

FINE . . . . . . $85.00       SOLD!!

Antique
Stair / Flooring
Saws

The


Simonds Flooring Saw  Weak etch. Straight. Different & Nice.

Good + . . . . . $65.00         SOLD!!

Atkins No. 100 Flooring Saw  Nice. Good etch. Near new with lite storage tarnish, not pitted. Sharp.

Good + . . . . . . $50.00         SOLD!!

Atkins 100 18" Floor Saw  Weak etch. 18" 10 pt. blade. Sharp

Good + . . . . . . $40.00

E. C. Atkins #100 Flooring Saw  This does not look to have seen much use.   It is a nice saw. Good etch straight and sharp.

Good +. . . . .$75.00           SOLD!!

Disston 6" Stair Saw Nice. Clear Disston stamp. Near new.

Fine . . . . . . $55.00           SOLD!!

Misc. Saws

The


Goodell Pratt #1 Bench Hack Saw  This unusual bench mounted hacksaw is a nice tool that is well made and a quality product. It takes 9" blades and is the only size GP offered in the catalog I looked in.   It is complete w/ its vice and in very nice condition. These would be great in the small production shop where repetitive cuts are needed. No more jumping out of the cut or bouncing around when trying to start one.

Good  +. . . . . $125.00          SOLD

Goodell Pratt Co. No. 1 Miter Box Hack Saw Patented 1899  As nice as one could ask for. Original paint and complete with the vise. None nicer. 

Fine  . . . . . $225.00         SOLD!!

Cast Iron Frame Hack Saw w/ American Eagle Decoration   Unmarked save stars and the raised Eagle in the casting. Note the cast out handle. Unusual and nice!!  

Good + . . . . . $45.00      SOLD!!

Bishop #10 Combination Saw  This saw is in very nice condition  I am not sure if the wear strips are new or made to be replaced over time.  Nice.

Fine. . . . .$75.00          SOLD!

18th Century Cane Handle Hand Saw   The collectors tag on this one identifies it as 18th century.  Super.

Good  +. . . . .$250.00           SOLD

Mystery Hand Saw w/ 2 Levels & Square  An odd take off on an old idea. Functions like a Disston 43 or 43, looks like a MF buck Rogers design with the space age metal handle. No markings or maker I see. 1 bad bubble. Never seen it before. Nail it to the wall and marvel.  

Good - . . . . . $20.00    SOLD!!

Civil War Era Amputation Saw w/ Ebony Handle  Pre Sterilization with pistol grip ebony handle. Straight.  Unmarked.   Different & Nice.

Good + . . . . . $150.00     SOLD!!

Ulmia 12" Fret or Turning Saw   This small turning saw has a 12" blade. It appears to be virtually unused. Nice.

Good + . . . . . $40.00     SOLD!!

9" Beech Bow / Turning Saw This small 9" blade turning saw is unmarked but look like a Marples. A nice little used saw.

Good + . . . . . $35.00         SOLD!!

Marples 12" Turning / Bow Saw  As above, and just as nice

Good + . . . . . .$65.00         SOLD!    

Patented January 9th 1906 12" Combination Back Saw  The overall condition is very nice.  The 12" blade is straight.The top and bottom are filed differently. The etch is there, but weak. I think it is a Bishop.

Good +. . . . . $45.00     SOLD!!

Davis Level & Tool Co Springfield Mass Hacksaw  Although unmarked I believe this saw was also made by Davis.It has a great open cast iron handle, and the same style blade locks as the marked saw above.   

Good + . . . . . $75.00         SOLD!!

Davis Level & Tool Co Springfield Mass Hacksaw  A well made quality piece by Davis Level & Tool Co. best known for their lines of levels & inclinometers. Davis made several different versions of hacksaws with this being a very hard to find piece. At first look, the brass sleeve looks like a repair but it is marked, and part of the adjustment for length. Note the positive stops at he ends as well.

Good + . . . . . $40.00       SOLD!!

Japanese Razor Pull Saw The label reads Razorsaw. Razorsaw Manufacturing Co. is a well known maker of pull saws. The strongback blade is removable / replaceable. The blade is stained from light rust that was removed after long storage. The teeth are good, and it is straight.

Good . . . . . $20.00       SOLD!!

Saw Sharpening Tools

The


Gibbs Jointer  The Gibbs jointer is the tool of choice for jointing 2 man crosscuts properly when sharpening them. This example is straight, damage free, and shows almost no signs of use.

Fine  . . . . $195.00             SOLD!

W. E. Gibbs Jointer / Saw Sharpening Tool   Nice overall condition noting the fragile paint that is beginning to peel off. That remaining paint is a testament to how little use this saw. (get the pun there)  It is an earlier model with just one patent date from 1914 and Patent Pending. Later models have a second patent from 1917.  I have read that the earlier ones are better made. A few minor spots of pitting on the swivel arms. Unusual & Nice!!    Ready to go back to work.

Good + . . . . . $245.00        SOLD!!

Anderson Saw Sharpening Rakers & Micrometer  Clean & Nice!!  Two of the rakers are the same, the third one has 2 adjustment screws on top. Not sure what the micrometer does or refers to. The swedge is in a box, but it might not be the right one. The paper work indicates it is one #, the box another. You decide. All are NOS with just light storage rust that will clean.

Fine  . . . . . $395.00  / Lot         SOLD!!

Disston No. 20 Universal Crosscut Saw Tool Mint in original box. Looks to have never been used. Everything one needs to become a pro cross cut saw sharpener. None nicer.

Fine . . . . . . 175.00           SOLD!!

Wilson Patent Saw Filer  This unusual saw filing guide was made by  “The Globe Mfg. Co. Painesville Ohio U.S.A”. The wooden block is marked “WILSON FILER” The patent dates read PATD.NOV.14.93, and  PATD.JAN.12.1897.The angle references are clear on the other end.  The base measures 9-3/4” long, and the sliding arm measures 11” long. A nice example of a hard to find hand saw sharpening tool.

Good + . . . . . . $45.00       SOLD!!

BACK to Tool Archive

This is just a sample of the many antique & collectible tools we have sold.
Click link to see other Sales Archive Pages on this Site.

We Buy Quality Antique Tools
Contact Us at AntiqBuyer@gmail.com

Our current offering of Antiques for sale are at our sister Website Patented-Antiques.com.

This website is Copyrighted
Larry & Carole Meeker