This is just a sample of the many
antique tools we have sold.
Click link to see other
Sales Archive Pages on this Site.
We Buy Quality Antique Tools
Contact Us at
AntiqBuyer@gmail.com
Special Note Concerning Prices Seen Below:
Most prices seen reflect actual sale results from this website.
Prices seen
span a long period of time and may not reflect current values. Some
are selling for more, many now sell for less.
On some pieces you will see no price, or a price range,
with or without an explanation. The reasons for that are discussed on the FAQ page.
Our current offering of
Antiques for sale are at our sister Website Patented-Antiques.com.
Stanley #
9 Cabinet Makers Low Angle Miter Plane w/ Hot Dog Handle The #9
miter plane was
known as Stanley's piano maker or cabinet makers plane.
It is a low angle miter plane designed for fine finish work and when properly
tuned and set up will produce a fine finish.
This example is damage
free, and has a nice even dark patina with no rust or pitting. Almost
all of the original japanning is still on the interior surfaces. They are
often damaged around the adjuster area at the rear, but this one is nice and
damage free. The hot
dog side handle is original and not a knockoff. Look at the halo
it has left on the side of the plane when removed in the other pics. The throat is nice,
and there is lots of life left in the cutter. It also has the proper
long neck lever cap. A nice
example of a hard to find plane. Good + . . . . . $1295.00
SOLD!!
Stanley #
9 Cabinet Makers / Piano Makers Low Angle Miter Plane This is an earlier and longer version of the # 9 miter plane. Note the
longer tail and front piece than on the one above or other later examples. The #9 miter plane was
known as Stanley's piano makers or cabinet makers plane. It is a low angle miter plane designed for fine finish work and when properly
tuned and set up will produce a fine finish.
This example has been carefully lapped and is damage free. Almost
all of the original japanning is still on the interior surfaces. These planes are often damaged around the adjuster area at the rear, but this one is nice and
damage free. The throat is nice and there is lots of life left in the cutter. It also has the proper long neck solid lever cap. A nice
example of a hard to find plane. Nice!! Good +. . . . . $895.00
SOLD!!
Stanley #
193 Fiber Board Plane Stanley only made this
plane for 10 years or so before WWII and the advent of sheetrock ended its
production run. That
fact did not change its appeal value or desirability(lack of) as a collectible.
It has a beautiful period Rosewood handle, and lots of other good spare parts.
There are about 1/2 dozen or more cutters, not shown, as well. Nice!! Good + . . . . . . . $85.00 SOLD!!
Stanley
# 20 Compass Plane This Stanley compass plane
has seen little if any use. There is some light rust on the steel sole on the
inside. It will clean. The japanning is near perfect and the
cutter full length with original grind. The owner put his intials on
one side. Few nicer!! Nice. Fine . . . . . $125.00 SOLD!!
Stanley
95 Edge Trimming Block Plane
Sweetheart era cutter is near full length. Some paint loss. Nice!!Good + . . . . . $85.00 SOLD!!
Stanley
67 Spoke Shave w/ Flat Bottom
Nice. No issues or apologies.
Good + . . . . . $50.00
SOLD!!
Stanley # 71 & 71 1/2 Router Planes
The
overall condition of either is pretty nice. Dull nickel w/ some loss
but no rust or other damage. The 71 1/2 has 3 cutters with 2 being
newer replacements.# 71 - - - - Good . . . . . $75.00
SOLD!!
Stanley #
11 1/2 Floor Plane This unusual plane
was made for less than 15 years back at the beginning of the 1900's.
It looks great, and sports a new coat of paint or enhancement of the
original paint. The 11 1/2 Floor Plane is very similar in design to
the #11 with the main difference being the longer front piece. They
were originally intended for the surfacing of hardwood floors. They
are used today in furniture making. Hard to find!!
Good + . . . . .$ 95.00 SOLD!
Early Stanley
/ Bailey # 13 Compass Plane
I do not seem to be able to find a type study for the
#13 plane and so do not know exactly where this fits into the scheme of
things. It is not a type 1 as the folding strips on those have a
different design. It does have a solid nut w/o the Bailey name on it, and it has a
solid cap. The cutter and chip breaker have Bailey patent info on
them. I assume those features would make it an early type
2 or so. It is dirty, and where the sole attaches at the front has
some issues as can be seen in the pics. Probably a pretty rare version
of this plane that will clean to look more presentable for the collection.
Good . . . . .$ 65.00 SOLD!
Stanley
# 20 Compass Plane The #20 compass plane
is the compass plane of choice for most users. This one is like new
and is ready to go
back to work. Very nice!!
Good + . . . . . . . .$ 225.00
SOLD
Stanley
/ Victor # 20 Compass Plane
This Stanley #20 was first offered in 1897 and came
nickel plated. After 1920 they were japanned. This would be
considered a type one. The Stanley 20 1/2 was offered at the time the 20 was nickeled so you could buy a
japanned version. It was dropped after 1917 and WWI. and the 20 was
then offered in a black japanned finish The condition
of this example is good w/ minor losses to the
finish. A favorite with
users and ready to go back to work.
Good + . . . .$ 150.00 SOLD!!
Stanley # 20 Compass Plane
The Stanley #20 Compass plane is the favorite among
users because of the heftiness and design of the plane. The design was
derived from Leonard Bailey's victor compass plane which Stanley bought the
rights to. This being a nickeled model would qualify it as a type 1 and
dates it from before 1919. They were japanned afterward. There has been
some nickel loss, but it is sound and ready to go back to work.
Good +. . . . .$ 195.00 SOLD!
Stanley # 40 Scrub Plane
This Stanley #40 scrub plane is one of the last versions put out, and is in
exceptional condition. This
example is all original and very nice with 95% of the original japanning and no
rust or pitting.
The cutter is full length, nice, and marked with the notched rectangle logo. This plane is
waiting to go back to work or put up on the shelf it is so nice. Nice!!
Good+ . . . . .$ 75.00 SOLD!
Stanley
# 97 Cabinet Maker Edge / Chisel Plane This is a
nice Stanley #97 Low Angle Chisel Plane. The leading edge of the plane is
nice. The cutter is full length and there is no pitting or rust. The plane retains well over 90% of
the original japanning and there is just a nice even patina on the exposed areas. A nice looking plane in nice
condition!!
Good + . . . . . .$ 325.00
SOLD!
Stanley
# 40 1/2 Scrub Plane
The Stanley #40 1/2 is the larger version of the more common #40 scrub plane. This
example is all original and in very nice condition.
There are still remains of the decal on the handle, The cutter is marked with the sweetheart logo,
and is near full length. This plane is
waiting to go back to work or put up on the shelf it is so nice. Nice!!
Excellent. . . . . $ 125.00 SOLD!
Stanley # 40 Scrub Plane This Stanley #40 scrub plane is in
Fine condition. No rust or pitting.
The cutter is nice. It is a later model. Fine . . . . . $65.00
SOLD!!
Stanley # 40
1/2 Scrub Plane This
sweetheart era Stanley #40 1/2 scrub plane is in
Fine condition. No rust or pitting.
The cutter is nice. Partial decal on handle. Super!! Fine . . . . . $135.00 SOLD!!
Stanley
# 148 Tongue & Grove Flooring Plane This T & G plane is
all original w/ proper cutters and in good + condition. It is the largest size
T & G plane Stanley made for use on 3/4 - 1" boards and cuts the 1/4" center at
7/8". Used to make T & G floor boards, or to make tongue & Groove joints in
pieces of furniture and the like. Nice!! Good
+ . . . . . . . $75.00 Sold!!
#48
Lakeside Match Plane
Stanley made the #48 size tongue & groove Plane for Montgomery Wards.
It probably dates from the 1920's or so. It is unmarked save for
the cutters which are marked Lakeside Ward's house name for the tools they
offered. This plane is in very nice condition with 95% or so of the
nickel plating remaining. It will make for a great user. Nice!!
Good + . . . . . $25.00
SOLD!!
Stanley
# 39 3/8 Dado Plane Very Nice!!! 90% or better of the original
japanning. Good Spurs, nice cutter. A useful tool.
Good + . . . . . $125.00
SOLD!!
Stanley
#66 Hand Beader / Shave
A super condition japanned example. Has
both guides, with different thumbscrews. They originally came w/ two
guides, and one thumbscrew which you moved back and forth. Thus
explaining why they are always missing. Shown w/ 1 cutter, but I have
an original set of 7 to go with this. Fine. . . . . $125.00 w/ 7 original cutters
SOLD!!
Stanley # 71 Router Plane
A pretty nice example. One cutter. No rust or pitting to speak of, and plenty of original nickel. Nice
enough!! Good + . . . . . $55.00
SOLD!!
Stanley #71
Router Plane A nice
example. Complete w/ original 3 cutters. The box is a bit ratty. It is a US made version. No condition issues. A useful tool and favorite with
users.
Fine . . . . . $150.00
SOLD!!
Stanley
#72 Chamfer Plane w/ Beading Attachment The plane is nice. The top of the tote has some losses. The back of the
beading attachment is pitted, but it is all OK. There is no cutter or lever cap for the plane attachment. A project looking for a few parts.Good . . . . . . . $325.00
SOLD!!
Stanley
# 72 Chamfer Plane A nice looking plane in nice
condition!!Good . . . . . .$ 295.00
SOLD!
Stanley
#148 Tongue & Groove Match Plane
Dirty but Nice!!
Good . . . . . $65.00
SOLD!!
Stanley #
62 Low Angle Cabinet Makers Plane This Stanley
# 62 low angle cabinet makers plane is in very nice original condition. The
throat is perfect and this plane shows little signs of use. It retains
nearly all of the original japanning and there is no rust or pitting on the
exposed areas. The cutter still has the original grind. A nice
plane ready for the collection or bench.
Fine . . . . . $350.00 SOLD!!
Stanley #
62 Low Angle Cabinet Makers Plane This Stanley
# 62 low angle cabinet makers plane is in very nice original condition. The
throat is perfect and the wood is good / nice as well. It retains
nearly all of the original japanning and there is no rust or pitting on the
exposed areas. The
previous owner did stamp a series of numbers into the side as shown in the
pics. A nice
plane that will make a good user.Fine . . . . . $295.00
SOLD!!
Stanley
# 113 Compass Plane This compass plane
has been lightly cleaned, and has a rich dark patina. There is no rust or pitting to speak of. There is
at least 70% of the of the japanning if not more. A nice plane.
Good + . . . . . . . $95.00 SOLD!!
Type
8 A (1936 - 1939) Stanley # 113 Compass Plane
Minty nice, top shelf collector condition. The type 8 A had a floral
design cap for the main bed adjuster knob. The type 8 A was
offered for only a few short years between 1936 & 1939 and is one of the hardest to find variants / types of the
113 plane to find. Production for the #113 compass plane ended in 1942
with the advent of WWII so this dates from near the end of their production
here in the US. None nicer!!
Good . . . . . $195.00
SOLD!!
Stanley
# 340 Furring Plane This type plane were meant to be
used much like the 40 & 40 1/2 for quickly removing a lot of stock in
preparation for final milling. The sole is very unusual where just the
middle portion is meant to come into contact with the work. The cutter
looks proper, but is from a 62 or 64 with its slotted back meant for an
adjuster which the 340 does not have. Nice enough!!
Good . . . . . $595.00 SOLD!!
3 Stanley
# 144 Edge Rounding Planes This grouping represents all the sizes, 1/4, 3/8 & 1/2" that Stanley made
of this interesting rounding plane. They are all in nice condition and ready for the shelf or bench.
Good + . . . . . $ 450.00 / Set SOLD!!
Stanley
# 146 / # 147 / & # 148 Tongue & Groove Planes
Here are all three sizes of these versatile planes that Stanley made.
The 2 smaller size ones are very nice, all original and will make great users or
additions to the collection. Nice!!Top / Left 146 . . . Fine . . . . . $225.00
SOLD!
Middle 147 . . . . Fine . . . . . $150.00
SOLD!
Bottom / Right 148 . . . . Good + . . . . . $75.00
SOLD!
Stanley # 56 Core Box Plane The
#56 Core Box plane is one of the hardest to find of the Stanly special use
planes. The collector bought this from Iron Horse Tool Auctions and paid the
hefty sum of $1260.00 back in the 80's. A large amount to pay for any Stanley plane.
The condition is very nice with no rust, pitting, or damage
to speak of. The japanning does have some
small pockmarks in it and a small area of some missing. All in all a
rare plane in nice condition that will make for a welcome addition to your
collection. Good+. . . . . . $425.00 SOLD!!
Stanley #
69 Beader / Scraper A nice
example of a hard to find collectible Stanley tool. This is a hard to find versatile
beader /scraper. It is complete with an original set of cutters. The
condition is very nice and this beader has seen little use. Most users
prefer the #66 or #72, but these are handy and versatile in their own right.
Good + . . . . . $325.00 SOLD!!
Stanley
#74 Floor Plane The plane is nice. As
is often the case, the
yoke and handle are gone from this example. These unusual planes weigh in at close to 20 lbs.
Can you imagine pushing that around all day? The overall condition is nice
with 85% or so of the original japanning. Good +. . . . . . . $295.00
SOLD!!
Stanley
# 95 Edge Trimming Plane This is in nice
condition. 95% of the original jappaning or better. Good cutter,
no apologies. Used to true up the edges of boards. Handy
tool. Ready for the shelf or bench.Good + . . . . . $ 125.00
SOLD!!
Stanley
# 146 SOLD!! # 147 SOLD!!
& #148 SOLD!!
Tongue & Groove Planes
These three planes came from the same fitted box.
The plating on each is near perfect. One has the original cutters, one has
one original and one good replacement, and the 148 has two "blanks" which look to
be cutters from a 45 and need to be sized to look proper. A very nice grouping.
Fine . . . . . .$ 395.00 / Set
SOLD!!
Stanley #
48 T & G Tongue & Groove Plane This an
early example that would be referred to as a Type 1 It cuts a 5/16ths
groove and can be used on boards from 3/4" to 1 1/4. These early #48's
were japanned, and this one is missing a lot of the original finish, but is not
rusted or pitted. To use you cut the
tongue, and then swing the fence to cut the groove. The cutters are nice.
It will make a good user.
Good + . . . . . $ 75.00
SOLD!
Stanley # 49
Tongue & Groove Match Plane
Stanley offered this design plane in two sizes, the #48, & 49. This is
the smaller size designed to be used on 1/2 - 3/4" stock, it cut a 3/16ths
Tongue and groove centered on 1/2". The fence swings to allow it to
cut one profile and then swung 180 degrees to cut the second. This
example is very nice with the nickel being 95% or better. The cutters are
proper. Nice!!Fine . . . . . $125.00
SOLD!!
Early Stanley #
48 Tongue & Groove Match Plane This
early example of a Stanley 48 has Miller's 7/6/75 patent date stamped into the bottom of the
plane. (see pics) It is not marked with the name or number anywhere.
Walters makes no mention of this and says Type 1's are marked w/ a later
1876 date. One of those unexplained anomalies!! Very Nice!! Good + . . . . . $125.00 SOLD!!
Stanley
#48 Tongue & Groove Match Plane Very Nice!! Good + . . . . . $75.00
SOLD!!
Stanley
# 48 T & G Swing Arm Flooring Plane
Proper cutters. Nothing wrong, has seen little use and has
minimal nickel losses. Nice enough for the collection or will be a good user!
Fine . . . . . $75.00
SOLD!!
Stanley
# 48 T & G Swing Arm Flooring Plane
Proper cutters. Nothing wrong, has seen little use and has
minimal nickel losses. It will be a good user! Fine . . . . . $85.00
SOLD!!
Stanley
#147 Tongue & Groove Match Plane Stanley
offered this plane in 3 sizes. This is the middle one to be used on 1/2 -
3/4" stock. It cuts a 3/16ths tongue centered on 5/8" The handle is
marked with the # 147 and 5/8 size. Very Nice!! Good + . . . . . $125.00
SOLD!!
Stanley #
113 Compass Plane The 113 is one of the best known, and easily recognizable
of all Stanley special use planes. The sole of this compass plane can be adjusted to a
convex or concave curve with a simple turn of the front knob. This
example is from near the turn of the century and has a lateral adjuster that
earlier versions did not. It has a nice even patina, and shows some
signs of use, but not abuse, and is ready to be put back into use. A nice
example.Good + . . . . .$ 125.00
SOLD!
Stanley Second Model # 113
Compass Plane
This 113 has the nickel wheel w/ 4 holes. It is
just a little dirty and has seen little use. It is fully functional
and pretty nice overall. Everything is tight and proper and overall it is
much nicer than the one above condition wise. These early versions are
much harder to find than the later ones.
Good . . . . .$ 125.00 SOLD!
Stanley
# 113 Compass Plane The 113 is a
very versatile and well known plane. This example is ready to go
and in nice condition. Very nice!!
Good +.. . . . . . . .$ 150.00 SOLD
Stanley
144 Edge Rounding Planes
Stanley made this style plane in three sizes for about 20 years leading up to WWII.
Each is in fine little used condition. See Pics. Nice!!
Fine . . . . . . $225.00 / Choice $495.00 / Lot SOLD!!
Stanley # 164 Low Angle Smooth Plane
This plane is in pretty nice condition.
The Stanley 164 is considered one the the hardest to find of all planes that Stanley produced.
They were introduced in 1926 and production or catalog listings ended with the beginning of
WWII. Some have speculated that there was only
one production run and it was offered over the next 25 or so years till that supply
ran out.
The adjusting mechanism is vertical and very
tricky to get to operate, a factor that probably held back sales and plays a factor in its limited availability and super rarity.
The cutter on this one is the rectangular block, thus dating it from after 1936
and near the end of the offering. The handle finish is original with losses and
could stand to be refinished. The front knob is nice. The japanning is
approx. 70% with losses both at the front and around the handle. The sides are nice, and the sole
has been lapped and looks good. The throat area is nice. A rare plane at a
reasonable price!!Good + . . . . . . $1295.00
SOLD!!
Stanley #164
Low Angle Plane
The 164 low angle plane was offered for less than 20 years and as with many of
Stanley special use planes production ended with the coming of WWII.
This rare Stanley low angle plane is in good overall condition noting the grind
marks on the sole and the missing jappaning. It is basically damage free and
useable as it sits but would look much better if lapped and repainted.
It would be a choice candidate for a restoration and is priced accordingly. Good . . . . . . $1250.00
SOLD!!
Stanley
# 340 Furring Plane One of the more unusual
and hard to find planes that Stanley offered. An interesting design
that was offered for just 12 years ending in 1917 with the US entry into
WWI. The original condition is very nice and with its Pat Appl'd For
cutter would be considered a Type 1. It looks to have been hardly
used. Condition, condition, condition. A rare plane ready for the
collection.
Fine . . . . . $895.00
SOLD!!
Stanley #444 Dovetail Plane The Stanley #444 dovetail plane is one of the oddest planes made by Stanley.
They can cut both halves of dovetails. You can watch this being done
on You Tube. It was offered for a little over 25 years beginning in
1912. This example is in its original box that is a bit rough. It has all 4
original cutters, and
both spur blocks. I do not see any damage, welds, or pitting, but
there has been some nickel loss. Good + . . . . .$695.00
SOLD!!
BACK to Stanley Archive
This is just a sample of the many
antique tools we have sold.
Click link to see other
Sales Archive Pages on this Site.
We Buy Quality Antique Tools
Contact Us at
AntiqBuyer@gmail.com
Our current offering of
Antiques for sale are at our sister Website Patented-Antiques.com.
This website is Copyrighted
Larry & Carole Meeker